We are the #1 pool repair company in Sarasota, FL. We install pool pump brands like Hayward, Pentair, Jacuzzi and Jandy, as well as others. Our services include pool pump repairs, pool resurfacing, pool heater repairs, and pool leak detection for residential and commercial pools in Sarasota, FL.
We bring over 11 years of experience with services, installs, and business management. Sarasota’s coastal conditions make equipment placement, corrosion checks and safe water handling part of the plan. We match repairs and installed products to your pool and explain applicable manufacturer warranties.
We renewed the pool interior with standard plaster. Preparation and application took 6 days, followed by a 28-day water startup and curing-care period. Filling, brushing and water checks follow the chosen finish’s instructions; swimming clearance is confirmed separately.
The project involved a leaky pool pump. The homeowner chose a variable-speed replacement, with the new pump and agreed connections installed in 1 day. The equipment is matched to the existing circulation system.
The pool needed a top-up every couple of days. A 2-hour detection visit investigated the water loss and narrowed the suspected leak location. The edited comparison shows a dye-test illustration; the $450 charge covers detection, with any repair priced separately.
Choose the work that fits your pool.
A noisy or leaking pump may need a targeted repair. We check the seals, housing, motor and connected plumbing before recommending parts. The aim is to address the cause of weak circulation or water loss. Sound equipment does not need to be replaced just because one serviceable component has failed.
View service
Replacement makes sense when the condition or parts cost supports it. We compare a suitable pump with the existing filter, heater, plumbing and controls. Your pool use also matters when setting up operation. The estimate identifies the model and connection work so you can compare the complete installation.
View service
A fresh interior starts with the condition of the old surface. We assess roughness, loose material and the finish you want before setting the scope. Plaster, quartz and pebble options have different textures and care needs. Tile, coping and underlying repairs are discussed separately when they are outside the finish work.
View service
We assess heaters that stop, show faults or fail to maintain the expected temperature. The model, circulation and controls help guide the diagnosis. We compare repair options with replacement where appropriate. Any work involving electrical, gas or refrigerant systems needs the right qualified trade and a clearly defined scope.
View service
Frequent top-ups deserve an explanation. We review the water-loss pattern and inspect the pool fittings, equipment and connected plumbing. Appropriate tests help locate the likely source before a repair is proposed. Diagnosis and the resulting repair are separate scopes, so the next step is clear before work begins.
View service
The filter needs to work with the pump and pool demand. We assess seals, valves and serviceable media alongside the pressure vessel itself. A worn gasket can be a repair; a cracked tank is different. Replacement options must suit the actual circulation system and allow practical access for maintenance.
View service
A shared pool needs reliable circulation and a repair plan that fits its operation. We review pump components and the connected filtration system with the operator. Proposed repairs identify the parts and expected shutdown. Applicable review is considered before equipment changes, rather than treating the installation like an ordinary backyard pump.
View service
A commercial replacement must match the installation and operating requirements. We review equipment information, controls and connections before comparing options. Motor size alone is not a complete specification. The written scope identifies plumbing or electrical changes and provides a basis for scheduling the closure with the property team.
View serviceCondo and hospitality properties need finish work planned around a closure. We assess the interior, preparation and fittings before discussing materials. Operator coordination and applicable health review are part of the project plan. Startup, inspections and reopening are separate from the day the new finish is applied.
View serviceShared-pool heating needs depend on the equipment and operating demand. We assess the fault alongside circulation and connected controls. The proposal explains compatible parts and any required installation changes. Access, qualified trade work and the property schedule guide how repairs are completed and the system is checked.
View serviceTop-up records and operating logs can help explain a shared pool’s water loss. We review that information before selecting appropriate tests for fittings, equipment and plumbing. Access and safe closure are agreed with the operator. Findings then support a separate repair scope, rather than an open-ended excavation allowance.
View service
Commercial filtration needs a system-level assessment. We review the pressure equipment, serviceable components and connection layout before proposing work. Safe shutdown and access are coordinated with the property operator. Replacing a damaged vessel is a different scope from changing a seal, and the estimate should make that distinction clear.
View servicePlanning ranges with a clearly defined scope.
| Service | Typical price range |
|---|---|
| Pump motor replacementPublished local motor-only planning range | $600–$1,100 |
| Pool pump replacementPublished local installed range; model and connections vary | $1,150–$3,300 |
| Pebble pool resurfacingLocal published installed range; preparation and product vary | $12,000–$22,000 |
| Gas pool heater repairMajor components can exceed this published range | $300–$1,500 |
| Pool leak detectionDiagnosis; features, larger pools and repairs add cost | From $360 |
| Service | Typical price range |
|---|---|
| Commercial pump repair / replacementEquipment, connections, closure and review requirements | System-specific quote |
| Commercial heater repairsParts, qualified trades and access | Equipment-specific quote |
| Commercial resurfacingPreparation, finish, health review and reopening | Measured project quote |
| Commercial leak detectionPublished local starting fee; grate count and system scope vary | From $645 |
Published external planning benchmarks are not our fixed quotes. Scope and sources are recorded in the local guide below. Access, equipment, preparation and repairs affect price; commercial work is scoped separately.
Sarasota pool renovations can involve plaster or pebble interiors, tile, coping and screened-lanai access. Match the finish system to the existing shell. Fiberglass needs compatible materials; saltwater describes a chlorination method, not the construction of the pool.
A 12 × 24 ft pool has a 288 sq ft water footprint; a 15 × 30 ft pool has 450 sq ft. These are dimension examples, not a measured Sarasota average. Depth, walls, steps and an attached spa determine the actual interior area and water volume.
A larger house does not necessarily have a larger pool. Equipment labels, measured pool dimensions, deck access and the work scope provide a better basis for a repair estimate than the size of the home. No verified citywide average home or pool size is claimed.
Check whether the address falls within the City of Sarasota, another municipality or unincorporated Sarasota County before arranging work. Confirm the exact structural, plumbing, electrical or equipment scope with that building department. Public pools also have DOH-Sarasota renovation and resurfacing forms; approval, inspection and reopening steps must be planned separately.
Checked November 6, 2026. Figures are other local providers’ published benchmarks, not Sarasota Pool Repair Pro quotes. On-Time Pool Service publishes equipment and pebble-finish ranges; Advanced Leak Detection publishes diagnostic starting fees. Do not treat a service call as a completed repair or a whole renovation as finish-only work.
Describe the symptom, property type and equipment involved. Photos of labels and the work area help prepare for the visit.
Assess the condition and use appropriate checks to narrow the issue. Identify a leak or structural concern separately from surface wear.
Explain the findings and discuss a targeted repair, suitable replacement or finish choice. Make inclusions and separate work clear.
Confirm access, parts and timing. Account for the property operator and applicable review before a commercial closure or equipment change.
Complete the agreed work and check the relevant operation. Review the result against the approved scope before handing the project back.
Review operating settings or finish care. Explain startup and return-to-use conditions when they apply to the selected work.
Yes. Home-pool repairs and shared-pool projects have different equipment and operating needs. The four service pages explain the work and where a separate commercial plan is needed.
We assess the failed component and the condition of the full system. Parts availability, compatibility and the complete cost guide the recommendation.
Check whether the address falls within the City of Sarasota, another municipality or unincorporated Sarasota County before arranging work. Confirm the exact structural, plumbing, electrical or equipment scope with that building department. Public pools also have DOH-Sarasota renovation and resurfacing forms; approval, inspection and reopening steps must be planned separately.
No. Detection is the testing and findings. Parts, excavation or finish repairs may need a separate estimate after the source is identified.
Not automatically. The estimate should name the interior finish and explain whether tile, coping, deck work and underlying repairs are included.
It depends on the work. New finishes have startup and water-care requirements; public pools may also have reopening conditions. Follow the project-specific instructions.
